Cement floor machine is mainly composed of mixing system, feeding system, mold forming system, vibration compaction system, control system and maintenance system. The mixing system is responsible for accurately proportioning and fully mixing raw materials such as cement, sand and stone to form a uniform concrete slurry; The feeding system transmits the mixed slurry to the mold forming system; Mold molding system according to the design requirements for accurate molding, to ensure that the shape and size of the floor meet the requirements; The vibration compaction system makes the concrete slurry more closely arranged in the mold through the action of vibration, and improves the compactness and strength of the floor. The control system is responsible for the automatic control of the entire production process to ensure the coordinated operation of each system; The curing system is used to conserve the floor to speed up the hardening process.
Raw material preparation:
The raw materials of cement floor machine mainly include cement, sand, stone and so on. These raw materials are subject to strict quality inspection and screening to ensure that they meet production requirements. High-quality cement that meets national standards should be selected for cement, sand should be screened and cleaned to ensure uniform particle size distribution, and stones should be selected for moderate particle size and stable quality.
Precise ratio:
After the preparation of raw materials, it is necessary to carry out accurate proportioning. The proportioning process needs to determine the proportion of raw materials such as cement, sand, and stone according to the specific design requirements and engineering requirements. The proportioning process requires the use of an accurate metering system to ensure that the amount of each raw material is accurate. Accurate ratio is one of the key factors to ensure the quality and performance of the floor. At the same time, it is also necessary to pay attention to the water content in raw materials to avoid affecting the quality and performance of concrete due to too high or too low water content.
Whisk:
In the mixing system, the well-proportioned raw materials are fully stirred to form a uniform concrete slurry. The mixing time and mixing speed should be controlled during the mixing process to ensure the uniformity and stability of the concrete. At the same time, it is also necessary to pay attention to parameters such as temperature and humidity during the mixing process to avoid deterioration or deterioration of concrete due to excessive temperature or humidity.
Feeding and mold forming:
The mixed concrete slurry is fed into a special mold through a feeding system. The shape and size of the mold determine the final shape of the floor. In the feeding process, it is necessary to control the feeding speed and feeding amount to ensure that the concrete slurry is evenly distributed in the mold. The design of the mold needs to be customized according to the specific needs to ensure that the size and shape of the floor meet the design requirements. At the same time, the material and manufacturing process of the mold also need to meet certain standards and requirements to ensure its durability and stability.
Vibration compaction:
Inside the mold, the concrete is compacted by high-frequency vibration or pressure to ensure a tight, bubble-free internal structure. In the process of vibration compaction, the vibration frequency and amplitude should be controlled to ensure that the concrete paste is evenly distributed in the mold and achieves the required compactness. Vibration compaction is one of the key steps to improve the quality and performance of the floor.
Maintenance:
The molded floor needs to undergo a period of maintenance to speed up its hardening process. In the maintenance process, temperature, humidity and other conditions should be controlled to ensure that the floor is in the best maintenance state. The length of maintenance time needs to be determined according to the specific design requirements and engineering requirements. At the same time, the state of the floor needs to be checked regularly during the maintenance process to ensure the stability of its quality and performance.
| Product name |
Large span floor machine |
| Product type |
Concrete machinery |
| Product alias |
Hollow wall equipment |
| Custom machining |
is |
| Transmission mode |
pushing |
| Sales territory |
Global scale |
| Product use |
Hollow floor, wall plate, etc |
| manufacturer |
Rain machinery |
Note: The above parameters are for reference only, please contact your customer service manager for specific values.
Factory corner display and information
Shandong Feiyu electromechanical Technology Co., LTD
Our History
Our company was established on june 3, 2019. In that year, we began to produce prestressed hollow slab forming machine, purlin forming machine, lintel wood forming machine and light wallboard machine. In 2020, we began to produce sanitation equipment mainly based on sweeper. In 2021, the crawler series, three wheel and four-wheel transport vehicles began production, and in 2022, the whole company started the R & D and manufacturing of cranes and 3-16 on-board cranes.
Our Factory
Our company mainly produces a variety of mechanical equipment with domestic advanced level, such as prestressed hollow slab forming machine, purlin forming machine, lintel and wood forming machine, light wallboard machine, crane, truck mounted crane, crawler transport vehicle, sweeper and so on. The design is scientific, reasonable and durable. Among them, the concrete equipment has simple operation, fast forming speed, dense extrusion, high strength, smooth and tidy plane, saving time, labor and convenient maintenance It has long service life and reduces the cost of prefabricated components, so that each component factory has strong competitiveness and high economic benefits.
Our Product
The first series: concrete floor machine, concrete column forming machine, concrete lintel forming machine, super thick and large-span international concrete floor machine, concrete enclosure machine, and various special-shaped precast unit forming machines are designed and customized according to user needs.
The second series: 5-16 crane, three wheeled transport vehicle, four wheeled transport vehicle, 3-16 truck mounted crane
The third series: sweeper and remote control cutting machine
The fourth series: 1-15t crawler transporter, crawler crane, crawler elevator.
Product Application
Building materials processing industry, hoisting industry, environmental sanitation industry and field engineering operation
Our Certificate
Production Equipment
One 630kVA transformer, one 5T gantry crane, two intelligent boring machines, one intelligent planer, one large boring and planing integrated machine tool, five welding robots, one 75kW diesel generator, one 16t truck crane, one four column hydraulic machine, one air compressor, five automatic sub arc welding machines, five AC welding machines, one CNC cutting machine, one bending machine, one edge planing and beveling machine, one oil pressure folding machine, and one air compressor, One automatic derusting grinder and four spray guns.
Production Market
With strong technical force and excellent workmanship, our products sell well in dozens of provinces, cities and regions across the country and are exported to Russia, Uzbekistan and Thailand, Bangladesh, India, Nigeria, Malaysia, Indonesia, the Philippines, South Africa and other dozens of countries and regions are modern enterprises integrating science, industry and trade. Over the years, due to the timely innovation of products, stable quality, simple operation, long service life and easy maintenance, they have won the trust of customers. It has long cooperated with provincial, municipal and local technical colleges and universities to develop new technologies and high-quality new products, elaborately developed and produced three series of more than 40 varieties of building materials and equipment, with sophisticated technology, advanced process standards and unified standards for spare parts.
Our Service
Pay attention to quality, service and management, and regard customers as God forever. Parts are sent promptly and quickly, customer visits and technical guidance are accepted 24 hours a day, and lifelong maintenance services and spare parts are provided. Our factory has always been "customer-oriented" to provide customers with overall and comprehensive services; "Service as the core" to create the most valuable products for customers; "Focus on quality" and provide all-round service to every customer! Exquisite products, perfect services and preferential prices are the business tenets of Shuangli people. The product quality is the key to win in the market competition and the foundation of enterprise development. We sincerely cooperate with friends from all walks of life to share a win-win situation with strict management and the principle of "good faith, quality and service".
Audited Supplier 
){kind=link}