1. Body structure design
The small horse mixer uses high-strength steel as the main frame, and after precise calculation and optimization design, it ensures that the body is light and stable, can withstand the huge torque and vibration generated during the mixing process, and ensure the safety during transportation. Its unique tank design, using the principle of fluid mechanics, optimizes the mixing effect of concrete and reduces the energy consumption in the mixing process.
2. Power system configuration
The car is equipped with a high-performance diesel engine, matched with an advanced transmission system, providing sufficient power output to ensure stable mixing efficiency and driving speed under various conditions. At the same time, the engine meets environmental emission standards, reducing the impact on the environment.
1. Efficient mixing capacity
The tank of the small horse mixer truck is equipped with special mixing blades. Through the precise spiral Angle design, the efficient and uniform mixing of concrete is realized. Whether it is ready-mixed concrete or on-site batching, it can quickly achieve the uniformity and fluidity required for construction.
2. Intelligent control system
Equipped with advanced electronic control system, real-time monitoring of stirring status, engine working conditions and fuel consumption and other key parameters, users can easily adjust the mixing speed through the control panel, set the mixing time, and even achieve remote monitoring and fault diagnosis, greatly improving the convenience and safety of the operation.
1. Preparation
Before operation, it is necessary to check whether all parts of the vehicle are in good condition, including the tank, transmission system, tires, etc., to ensure that the safety lock device is effective. According to the construction needs, prepare the appropriate amount of water, cement, aggregate and other raw materials, and put them into the mixing tank according to the proportion.
2. Start mixing
Start the engine, when the water temperature and oil pressure reach the normal range, set stirring parameters through the control panel, and start the stirring procedure. During the process, pay attention to the instructions on the control panel to ensure the smooth stirring process.
3. Transportation and unloading
After the mixing is completed, drive the mixer truck to the construction site, rotate the mixing tank to the appropriate Angle as required, and use gravity or air pressure system to unload the concrete. During the discharge process, the discharge speed can be adjusted to control the flow of concrete to meet different construction needs.
1. Daily check-ups
After each use, the vehicle should be thoroughly cleaned, especially inside the mixing tank, to avoid corrosion or hardening caused by concrete residue. At the same time, check the wear of key components such as tires, brake system and drive shaft, and replace damaged parts in time.
2. Regular maintenance
Perform routine maintenance of engine oil, oil filter, air filter, etc. according to the manufacturer's recommended maintenance cycle to ensure stable engine performance. At the same time, the electrical system and control system are comprehensively inspected to prevent potential failures.
3. Storage management
When parking for a long time, ensure that the vehicle is in a dry, well-ventilated environment and avoid direct sunlight or rain. Charge and maintain the battery regularly to prevent battery loss and damage.
| Mixer parameters |
| Vehicle name |
Tang Jun 2 Fang |
| engine |
4100 in the cloud |
| Overall dimension |
5400*2000*2800 |
| Driving form |
Rear-wheel drive |
| Hydraulic drive |
Engine loading |
| Variable speed box |
Wanli Yang 5 high and low speed |
| Maximum speed |
60km/h |
| wheelbase |
2600mm |
| Number of tires |
Six pieces |
| Tyre specification |
750-16 |
| Brake system |
Cutoff brake |
| Steering system |
Hydraulic power assist |
| Front and rear axle |
1062 |
| Vehicle mass |
4200kg |
| Vehicle name |
Tang Jun 3 Fang |
| engine |
4100 in the cloud |
| Overall dimension |
5600*2000*3000 |
| Driving form |
Rear-wheel drive |
| Hydraulic drive |
Engine loading |
| Variable speed box |
Wanli Yang 5 high and low speed |
| Maximum speed |
60km/h |
| wheelbase |
Six pieces |
| Number of tires |
Six pieces |
| Tyre specification |
750-16 |
| Brake system |
Cutoff brake |
| Steering system |
Hydraulic power assist |
| Front and rear axle |
1062 |
| Vehicle mass |
4500kg |
| Tank parameters |
| Tank material |
BW300TP high strength wear-resistant steel (shot blasting anti-rust treatment) |
| Blade material |
5mm alloy steel |
| retarder |
hebeiidae |
| Cooling system |
Xinxiang 18L |
| Discharge range |
180° up and down left and right adjustment |
| Head material |
8mm double head alloy steel |
| Hydraulic system |
Jinan Military Industry |
| Mode of operation |
Left and right sides or cab |
| Water supply system |
120L |
Note: The above parameters are for reference only, please contact your customer service manager for specific values.
Factory corner display and information
Shandong Feiyu electromechanical Technology Co., LTD
Our History
Our company was established on june 3, 2019. In that year, we began to produce prestressed hollow slab forming machine, purlin forming machine, lintel wood forming machine and light wallboard machine. In 2020, we began to produce sanitation equipment mainly based on sweeper. In 2021, the crawler series, three wheel and four-wheel transport vehicles began production, and in 2022, the whole company started the R & D and manufacturing of cranes and 3-16 on-board cranes.
Our Factory
Our company mainly produces a variety of mechanical equipment with domestic advanced level, such as prestressed hollow slab forming machine, purlin forming machine, lintel and wood forming machine, light wallboard machine, crane, truck mounted crane, crawler transport vehicle, sweeper and so on. The design is scientific, reasonable and durable. Among them, the concrete equipment has simple operation, fast forming speed, dense extrusion, high strength, smooth and tidy plane, saving time, labor and convenient maintenance It has long service life and reduces the cost of prefabricated components, so that each component factory has strong competitiveness and high economic benefits.
Our Product
The first series: concrete floor machine, concrete column forming machine, concrete lintel forming machine, super thick and large-span international concrete floor machine, concrete enclosure machine, and various special-shaped precast unit forming machines are designed and customized according to user needs.
The second series: 5-16 crane, three wheeled transport vehicle, four wheeled transport vehicle, 3-16 truck mounted crane
The third series: sweeper and remote control cutting machine
The fourth series: 1-15t crawler transporter, crawler crane, crawler elevator.
Product Application
Building materials processing industry, hoisting industry, environmental sanitation industry and field engineering operation
Our Certificate
Production Equipment
One 630kVA transformer, one 5T gantry crane, two intelligent boring machines, one intelligent planer, one large boring and planing integrated machine tool, five welding robots, one 75kW diesel generator, one 16t truck crane, one four column hydraulic machine, one air compressor, five automatic sub arc welding machines, five AC welding machines, one CNC cutting machine, one bending machine, one edge planing and beveling machine, one oil pressure folding machine, and one air compressor, One automatic derusting grinder and four spray guns.
Production Market
With strong technical force and excellent workmanship, our products sell well in dozens of provinces, cities and regions across the country and are exported to Russia, Uzbekistan and Thailand, Bangladesh, India, Nigeria, Malaysia, Indonesia, the Philippines, South Africa and other dozens of countries and regions are modern enterprises integrating science, industry and trade. Over the years, due to the timely innovation of products, stable quality, simple operation, long service life and easy maintenance, they have won the trust of customers. It has long cooperated with provincial, municipal and local technical colleges and universities to develop new technologies and high-quality new products, elaborately developed and produced three series of more than 40 varieties of building materials and equipment, with sophisticated technology, advanced process standards and unified standards for spare parts.
Our Service
Pay attention to quality, service and management, and regard customers as God forever. Parts are sent promptly and quickly, customer visits and technical guidance are accepted 24 hours a day, and lifelong maintenance services and spare parts are provided. Our factory has always been "customer-oriented" to provide customers with overall and comprehensive services; "Service as the core" to create the most valuable products for customers; "Focus on quality" and provide all-round service to every customer! Exquisite products, perfect services and preferential prices are the business tenets of Shuangli people. The product quality is the key to win in the market competition and the foundation of enterprise development. We sincerely cooperate with friends from all walks of life to share a win-win situation with strict management and the principle of "good faith, quality and service".
Audited Supplier 
){kind=link}