In the early stages of agricultural development, the picking of orchards was mainly done by hand. At this stage, the picking efficiency is low, the labor demand is large, and the fruit and fruit trees are easily damaged during the picking process. Manual picking not only requires a lot of time and labor costs, but also easy to cause physical fatigue and strain of pickers because of long hours of work. Therefore, the picking method at this stage has been unable to meet the needs of modern agricultural production.
With the progress of mechanical science and technology, orchard picking has gradually entered the primary stage of mechanization. At this stage, there have been some simple mechanized picking tools, such as hand mowers, chainsaws, etc., which have improved the picking efficiency to a certain extent, but have not been fully automated. At this time, the picking machinery still has problems such as single function, complex operation and low efficiency, which can not completely replace manual picking. However, this stage of exploration lays the foundation for subsequent automated picking.
With the development of high technology, orchard picking has entered the automated stage. Small orchard pickers were widely used at this stage. These pickers adopt advanced mechanical structure and technology, which can efficiently complete the picking task and greatly improve the picking efficiency.
Structural features: Small orchard picker small size, light weight, flexible and convenient operation, can easily cope with a variety of different sites and environments, including mountains, hills, plains and other terrain. At the same time, due to its small size, the picker is also convenient for handling and storage, saving farmers' time and labor costs.
Working principle: Small orchard picker mainly through vibration, impact or mechanical cutting to remove the fruit from the fruit branch. For example, the vibrating picker uses a fan or crank link vibrator to generate vibration, and transmits the vibration to the tree through the transmission of the vibrating rod and the claw, so that the fruit produces inertial force and falls off. After picking the fruit, the fruit collector is located under the tree to undertake, and then receive the container.
Advantages: Compared to traditional hand picking, small orchard pickers are faster and more efficient, while reducing the physical fatigue and strain caused by long hours of hand picking. In addition, the picker also uses an environmentally friendly power system to reduce environmental pollution and is a green and sustainable agricultural tool.
With the continuous development of technologies such as the Internet of Things and artificial intelligence, orchard picking has entered an intelligent stage. At this stage, small orchard pickers will be more intelligent, efficient and precise.
Intelligent recognition: The future small orchard picker will have intelligent recognition function, can accurately identify the maturity, size, color and other characteristics of the fruit, so as to achieve accurate picking.
Automatic navigation: The picker will be equipped with an automatic navigation system, which can independently plan the picking path, avoid repeated picking and omissions, and further improve the picking efficiency.
Remote monitoring: Through the Internet of Things technology, farmers can remotely monitor the working status of the picker, adjust the picking strategy in time, and ensure the smooth progress of the picking process.
Data analysis: The intelligent picker can also collect and analyze the production data of the orchard, provide farmers with scientific planting suggestions, and improve the production efficiency of the orchard.
| Unit type |
KX/SJT-800-200 |
| Rated power |
56KW |
| Maximum power |
59.6KW |
| frequency |
50HZ |
| Engine type |
Cloud inside power diesel engine |
| category |
Four cylinder water cooled in line |
| Power specification |
Forced air cooling, four strokes |
| Rated speed |
3000RPM |
| Chassis type |
Rubber track chassis |
| Track specification |
Engineering rubber track |
| Platform surface |
3000*4000MM |
| Maximum lifting height |
8M |
| Platform load |
200KG----2000KG |
| material |
High strength manganese steel plate |
| Net weight |
5200KG(for reference only) |
| Overall dimension |
5800*2500*2600MM |
Note: The above parameters are for reference only, please contact your customer service manager for specific values.
Factory corner display and information
Shandong Feiyu electromechanical Technology Co., LTD
Our History
Our company was established on june 3, 2019. In that year, we began to produce prestressed hollow slab forming machine, purlin forming machine, lintel wood forming machine and light wallboard machine. In 2020, we began to produce sanitation equipment mainly based on sweeper. In 2021, the crawler series, three wheel and four-wheel transport vehicles began production, and in 2022, the whole company started the R & D and manufacturing of cranes and 3-16 on-board cranes.
Our Factory
Our company mainly produces a variety of mechanical equipment with domestic advanced level, such as prestressed hollow slab forming machine, purlin forming machine, lintel and wood forming machine, light wallboard machine, crane, truck mounted crane, crawler transport vehicle, sweeper and so on. The design is scientific, reasonable and durable. Among them, the concrete equipment has simple operation, fast forming speed, dense extrusion, high strength, smooth and tidy plane, saving time, labor and convenient maintenance It has long service life and reduces the cost of prefabricated components, so that each component factory has strong competitiveness and high economic benefits.
Our Product
The first series: concrete floor machine, concrete column forming machine, concrete lintel forming machine, super thick and large-span international concrete floor machine, concrete enclosure machine, and various special-shaped precast unit forming machines are designed and customized according to user needs.
The second series: 5-16 crane, three wheeled transport vehicle, four wheeled transport vehicle, 3-16 truck mounted crane
The third series: sweeper and remote control cutting machine
The fourth series: 1-15t crawler transporter, crawler crane, crawler elevator.
Product Application
Building materials processing industry, hoisting industry, environmental sanitation industry and field engineering operation
Our Certificate
Production Equipment
One 630kVA transformer, one 5T gantry crane, two intelligent boring machines, one intelligent planer, one large boring and planing integrated machine tool, five welding robots, one 75kW diesel generator, one 16t truck crane, one four column hydraulic machine, one air compressor, five automatic sub arc welding machines, five AC welding machines, one CNC cutting machine, one bending machine, one edge planing and beveling machine, one oil pressure folding machine, and one air compressor, One automatic derusting grinder and four spray guns.
Production Market
With strong technical force and excellent workmanship, our products sell well in dozens of provinces, cities and regions across the country and are exported to Russia, Uzbekistan and Thailand, Bangladesh, India, Nigeria, Malaysia, Indonesia, the Philippines, South Africa and other dozens of countries and regions are modern enterprises integrating science, industry and trade. Over the years, due to the timely innovation of products, stable quality, simple operation, long service life and easy maintenance, they have won the trust of customers. It has long cooperated with provincial, municipal and local technical colleges and universities to develop new technologies and high-quality new products, elaborately developed and produced three series of more than 40 varieties of building materials and equipment, with sophisticated technology, advanced process standards and unified standards for spare parts.
Our Service
Pay attention to quality, service and management, and regard customers as God forever. Parts are sent promptly and quickly, customer visits and technical guidance are accepted 24 hours a day, and lifelong maintenance services and spare parts are provided. Our factory has always been "customer-oriented" to provide customers with overall and comprehensive services; "Service as the core" to create the most valuable products for customers; "Focus on quality" and provide all-round service to every customer! Exquisite products, perfect services and preferential prices are the business tenets of Shuangli people. The product quality is the key to win in the market competition and the foundation of enterprise development. We sincerely cooperate with friends from all walks of life to share a win-win situation with strict management and the principle of "good faith, quality and service".
Audited Supplier 
){kind=link}