Equipment structure: Vertical mixer is mainly composed of motor, reducer, screw, mixing barrel, discharge port, window, sealing device, electrical control system and other key components. The motor drives the screw to rotate through the reducer, and the screw blade design is unique, which can lift the material from the bottom of the mixing bucket to the top, and then scatter the material in the shape of an umbrella to achieve the up and down rolling and stirring. The inside of the mixing bucket is specially treated and has a smooth surface, which reduces the friction of the material during the mixing process and avoids the static electricity caused by friction or adhesion to the wall of the bucket.
Working principle: The working principle of the vertical mixer is based on the rapid rotation of the screw and the gravity action of the material. When the motor starts, the reducer reduces the speed of the motor and transmits it to the screw, and the screw begins to rotate. The rotating screw lifts the material from the bottom of the mixing bucket to the top, and then flutters it in an umbrella shape, and the material falls back to the bottom of the mixing bucket under the action of gravity to achieve up and down stirring. This mixing method ensures that the material is fully mixed in the mixing bucket and improves the mixing efficiency and uniformity.
Material preparation: Before using the vertical mixer, it is necessary to fully prepare the material. This includes the steps of material screening, weighing, proportioning and pretreatment. The screening of materials can remove impurities and unqualified particles to ensure the uniformity of mixing and product quality. The weighing of the material needs to be accurate to ensure the accuracy of the ratio and meet the production needs. The ratio of the material is based on the performance requirements of the product and the production process to ensure the quality and stability of the product. Pretreatment steps may include crushing, drying, heating, etc., of the material to improve the physical and chemical properties of the material, improve mixing efficiency and product quality.
Loading: After the material is ready, the material is loaded into the mixing bucket through the window or the entrance. During the loading process, it is necessary to pay attention to the uniform distribution of materials to avoid local accumulation or excessive density to ensure the uniformity and efficiency of mixing. At the same time, the load should also be controlled within the capacity of the mixing bucket to avoid material overflow or inadequate mixing.
Professional details: In the loading process, professional loading tools or equipment can be used, such as funnel, conveyor belt, etc., to improve loading efficiency and accuracy. At the same time, the mixing barrel should be cleaned and inspected before loading to ensure that there is no residue or damage to avoid contamination of the material or affecting the mixing effect.
Mixing process: When the material loading is completed, start the motor and the screw begins to rotate. Driven by the screw, the material is lifted from the bottom of the mixing bucket to the top, and then flies in an umbrella shape to scatter and return to the bottom. In this process, the material is rolled up and down in the mixing bucket to achieve full mixing and mixing. Mixing time can be adjusted according to the nature of the material and mixing requirements to ensure the uniformity and efficiency of mixing. At the same time, the shear force and impact force generated during the mixing process contribute to the dispersion and mixing of materials and improve the mixing effect.
Mixing effect: The unique mixing method of vertical flat mouth mixer ensures the full mixing of materials. The rotation speed and force of the screw, as well as the internal structure of the mixing bucket, are carefully designed to ensure that the material is not overly squeezed or bumped during mixing, thus protecting the integrity of the material. At the same time, the shear force and impact force generated during the mixing process contribute to the dispersion and mixing of materials and improve the mixing effect. The mixed material has uniform particle size distribution and chemical composition, which improves the quality and stability of the product.
Discharge: After mixing is completed, the material is discharged through the discharge port. During the discharge process, attention should be paid to controlling the discharge speed to avoid material overflow or blockage. At the same time, the size and shape of the discharge port can be adjusted according to the need to meet the discharge requirements of different materials. When discharging, it is also necessary to pay attention to the uniformity and continuity of the material to ensure the quality and production efficiency of the product.
Cleaning: After the discharge is completed, the vertical mixer is cleaned. During the cleaning process, use appropriate cleaning agents and tools to ensure that the mixing drum, screw and other parts are clean. When cleaning the device, pay attention to avoid damage or pollution to ensure the normal operation of the device and extend the service life of the device. After the cleaning is completed, check and maintain the equipment, including checking the wear of the screw, mixing drum and other parts, as well as the operation of the electrical control system, to ensure the stability and safety of the equipment.
| Reserve tank volume: |
Five cubes |
Six cubes |
| Reserve tank body diameter: |
2500 |
3000 |
| Reserve tank height: |
1000 |
850 |
| Leg height: |
800 |
800 |
| Motor power: |
Level 4 (11KW) |
Level 4 (15KW) |
| Operating voltage: |
380 |
380 |
| Mixing frequency: |
About 9-10 RPM |
About 9-10 RPM |
| Shortage port: |
1 |
1 |
| Overall dimensions: |
2600*1800 |
3100*1650 |
| Machine weight: |
1500 |
1800 |
Note: The above parameters are for reference only, please contact your customer service manager for specific values.
Factory corner display and information
Shandong Feiyu electromechanical Technology Co., LTD
Our History
Our company was established on june 3, 2019. In that year, we began to produce prestressed hollow slab forming machine, purlin forming machine, lintel wood forming machine and light wallboard machine. In 2020, we began to produce sanitation equipment mainly based on sweeper. In 2021, the crawler series, three wheel and four-wheel transport vehicles began production, and in 2022, the whole company started the R & D and manufacturing of cranes and 3-16 on-board cranes.
Our Factory
Our company mainly produces a variety of mechanical equipment with domestic advanced level, such as prestressed hollow slab forming machine, purlin forming machine, lintel and wood forming machine, light wallboard machine, crane, truck mounted crane, crawler transport vehicle, sweeper and so on. The design is scientific, reasonable and durable. Among them, the concrete equipment has simple operation, fast forming speed, dense extrusion, high strength, smooth and tidy plane, saving time, labor and convenient maintenance It has long service life and reduces the cost of prefabricated components, so that each component factory has strong competitiveness and high economic benefits.
Our Product
The first series: concrete floor machine, concrete column forming machine, concrete lintel forming machine, super thick and large-span international concrete floor machine, concrete enclosure machine, and various special-shaped precast unit forming machines are designed and customized according to user needs.
The second series: 5-16 crane, three wheeled transport vehicle, four wheeled transport vehicle, 3-16 truck mounted crane
The third series: sweeper and remote control cutting machine
The fourth series: 1-15t crawler transporter, crawler crane, crawler elevator.
Product Application
Building materials processing industry, hoisting industry, environmental sanitation industry and field engineering operation
Our Certificate
Production Equipment
One 630kVA transformer, one 5T gantry crane, two intelligent boring machines, one intelligent planer, one large boring and planing integrated machine tool, five welding robots, one 75kW diesel generator, one 16t truck crane, one four column hydraulic machine, one air compressor, five automatic sub arc welding machines, five AC welding machines, one CNC cutting machine, one bending machine, one edge planing and beveling machine, one oil pressure folding machine, and one air compressor, One automatic derusting grinder and four spray guns.
Production Market
With strong technical force and excellent workmanship, our products sell well in dozens of provinces, cities and regions across the country and are exported to Russia, Uzbekistan and Thailand, Bangladesh, India, Nigeria, Malaysia, Indonesia, the Philippines, South Africa and other dozens of countries and regions are modern enterprises integrating science, industry and trade. Over the years, due to the timely innovation of products, stable quality, simple operation, long service life and easy maintenance, they have won the trust of customers. It has long cooperated with provincial, municipal and local technical colleges and universities to develop new technologies and high-quality new products, elaborately developed and produced three series of more than 40 varieties of building materials and equipment, with sophisticated technology, advanced process standards and unified standards for spare parts.
Our Service
Pay attention to quality, service and management, and regard customers as God forever. Parts are sent promptly and quickly, customer visits and technical guidance are accepted 24 hours a day, and lifelong maintenance services and spare parts are provided. Our factory has always been "customer-oriented" to provide customers with overall and comprehensive services; "Service as the core" to create the most valuable products for customers; "Focus on quality" and provide all-round service to every customer! Exquisite products, perfect services and preferential prices are the business tenets of Shuangli people. The product quality is the key to win in the market competition and the foundation of enterprise development. We sincerely cooperate with friends from all walks of life to share a win-win situation with strict management and the principle of "good faith, quality and service".
Audited Supplier 
){kind=link}